Nothing Phone (4b)

Swipe down twice from the top of the screen to access the expanded Quick Settings. Press the pencil icon, drag the Battery Saver tile up from the hidden tiles, and toggle it on. You'll also receive a prompt you to turn on battery saver when the battery of your phone goes below 20%.

There are two ways to enable NFC:
1. Go to Settings > Connected devices > Connection preferences > NFC. Toggle on the Use NFC.
2. Swipe down from the top of the phone to access the notification status bar > Swipe down again to access the control centre > Toggle the NFC icon.

Note: NFC is not available in India.

If you're getting too many notifications, manage your preferences as below: 1. Turn off notifications in settings: go to Settings > Notifications > App settings, select the app whose that you want to manage notifications for. 2. Quickly turn off notifications from the notification bar: swipe down the status bar on the notification page, long-press the notification content and click on Turn off notification. On the new page, select the notifications you want to turn off and click Done to finish.

1. Go to Settings > Apps > See all apps > Find clock and tap open. Tap the add icon to create a new alarm. 2. Swipe down twice on your screen to access quick settings. Tap on Clock and go to Alarm. Tap the add icon to create a new alarm and adjust the below settings: - Repeat: select a time for your alarms to repeat between Monday to Sunday. - Label: add labels for your alarms. - Alarm sound: select a sound for your alarm. - Vibrate: turn vibration on/off. Tap on the More icon in the upper right corner and go to Settings: 1. Silent After: automatically silence an alarm after a set period of time. 2. Snooze length: set snooze length from 1 to 30 mins. Note: 1. You can set as many alarms as you want. 2. The alarm sound will be ring even if the phone is in silent mode.

To change the system language, go to Settings > System > Language and Region > System languages.

We recommend using a Google Account to download apps and copy content to your new Nothing phone.

Step 1: Make sure you have:
1. Your fully charged Android phone on the latest software.
2. Your new, fully charged Nothing phone and its charging cable.
3. A good WiFi connection.

Step 2: Setting up your Nothing phone:
1. Turn on your Nothing phone. Tap → in the setup wizard.
2. If you have a SIM card, insert it now.
3. Connect to a WiFi or mobile network.

Step 3: Connect the phones. This process typically takes between 5 minutes and 1 hour.
1. When 'Set up using another device' appears, tap 'Android device'.
2. Turn your Android phone on and unlock it. Scan the QR code on the screen of your new Nothing phone.
3. On your Nothing phone, log into your Google Account and tap Sign in.
4. Copy your data. If you don't want to transfer specific data, uncheck the box next to the category. When you're ready, tap Copy.
5. Once your data is copied, click Finished. If one of your apps didn't transfer, you can download it through the Google Play Store.

With the official Nothing charger, the Phone can achieve a full charge in approximately 86 minutes

The Phone's charging current is influenced by temperature, which can affect charging speed. Both low and high temperatures can slow down the charging process. Depending on the protocol, each charger has different charging speed and full charging time. For an optimal charge, we recommend that you:
1) Use a PPS protocol charger.
2) Charge the phone at room temperature (e.g.: 25°C ±3°C) with the screen turned off.

The dimensions and weight of the Phone (4b) are as follows:
Height: 164.4 mm
Width: 78.2 mm
Depth: 8.6 mm
Weight: 210 g
Note: The above specifications are based on data from the Nothing laboratory. Actual size and weight may vary due to the manufacturing process and measurement methods.

Nothing Phone (4b), Type-C cable, Safety information, Screen protector (pre-applied), and SIM tray ejector, protective case

To turn the recording indicator off, go to Camera > Swipe down or click the top-right button > open Rec.light.

Note: The Rec.light is on by default.

Private Space on Nothing OS provides a secure environment to store and manage sensitive apps, files and photos. It features:

1. Additional authentication processes like a password, code or pattern.
2. Hidden apps, which don't appear in your regular apps list, recent apps or notifications.

To open Private Space: Go to Launcher > App Drawer > Private Space. Swipe right in the app drawer to enter (some regions may require a left swipe).

If your phone is lost, you should alert the police as soon as possible. You can also use the Find My Device function.

To enable Find My Device, go to Settings > Security and Privacy > Device Finders > Find Hub.

Requirements for Find My Device:
1. You must be logged into a Google Account.
2. The lost phone is turned on.
3. The lost phone is using a data network or wireless network.