How-To

By default, the watch's ringer for incoming calls is turned off, and only vibration is enabled. If you want the watch to ring for incoming calls, please follow these steps:
1. Go to the watch's settings.
2. Navigate to "Sounds"
3. Select "Volume"
4. Adjust the ringer volume for incoming calls to your desired level.

The Activity Score is a personal physiological activity indicator, based on heart rate data and combining the intensity of daily activities with multidimensional physiological data. This comprehensive assessment is converted through an algorithm into an intuitive Activity Score. It does not rely on a single data point, allowing you to gain a comprehensive understanding of your physical condition.

In your daily life, you can check your current and 7-day Activity Score through the Activity Score feature on the watch.

No matter what type of activity you engage in, you can earn an Activity Score. To achieve a higher score, you can accumulate points by increasing your physical exercise or daily activities.

You can view the calendar by pressing the Functional Crown on the watch. After entering the menu list, scroll down to find and select the Calendar.

The notification wake screen on the watch is off by default. To enable it, follow these steps:
1. Connect the watch with the app.
2. Go to the watch's settings page and scroll down.
3. Open **Display & Brightness.
4. Find **Notification to wake** and turn on the switch to enable this feature.
Once enabled, if the watch receives a notification while the screen is off, the screen will light up to alert you to check the notification immediately.
Please note that this feature can affect battery life, so it is recommended to disable it when not needed.

The notification wake screen on the watch is off by default. If you need to enable it, follow these steps:
1. Go to the watch's settings page and scroll down.
2. Open **Display & Brightness**.
3. Find **Double tap to wake** and turn on the switch to enable this feature.
Once enabled, you can double-tap the watch screen to wake it up when the screen is off. This feature is supported on all pages when the screen is off.
Please note that this feature can affect battery life, so it is recommended to disable it when not needed.

After connecting the watch with the app and wearing the watch, go to the workout page in the app and start any workout. The watch will display the corresponding workout mode and begin the workout directly.

During synchronized workouts, if the app and watch disconnect, both the app and watch will separately record the workout for up to 5 minutes. If the connection is not restored within 5 minutes, the workout will automatically end on both the app and the watch. If the connection is restored within 5 minutes, the data will synchronize with the watch's workout data, but the disconnection may result in the app missing some heart rate data.

1. Set Up Quick Gestures:
- Quick Gestures can be set up from the settings list on the watch. By default, they are turned off and can be enabled on the watch.

2. Learn the Gestures:
- After entering the gesture settings page, you need to go through a learning process for the gestures. Once completed, you can start setting up the gestures.

3. Assign Functions:
- Each gesture can be assigned to a single function in different scenarios. Other app functions will only respond when the main watch face is active.
- Ensure the watch screen is on before performing any gestures, as gesture recognition will only trigger the corresponding actions when the watch is in an active screen state.

4. Exceptions:
- Quick Gestures will not respond in Do Not Disturb mode, Power Saving mode, on the AOD (Always-On Display) watch face, or during detected sleep periods.

After connecting the watch with the app, scroll down on the Devices page in the app to find Quick Reply. Tap on "Add Quick Reply" to start setting up your response phrases. You can set up to 10 phrases, with each phrase having a maximum of 140 characters.

Note: Quick Reply is only supported on certain applications for Android phones.

1. After connecting the watch with the app, go to the Devices page in the app and find the Reminder feature.
2. In the app, you can add reminders, enable notifications, and set the reminder date, time, and repetition cycle (default is "Remind once"; options include: daily, weekly, monthly, yearly, or custom days from Monday to Sunday).
3. After adding a reminder, it will default to "Not completed." You can mark it as "Completed" by checking it off. The watch will display items categorized as "Not completed" and "Completed" based on the app settings.
4. Reminders in the app will sync to the watch's "Reminder" list. At the set time, the watch will alert you with a vibration or sound & vibration. You can choose "Snooze" or "Turn off." If you choose "Snooze," the reminder will reappear with a vibration or sound & vibration after 10 minutes. If you choose "Turn off," the reminder will be moved to the "Completed" category.

After connecting the watch with the app, press the Functional Crown on the watch to enter the menu page, then scroll down to find the World Clock.

You can select regions on the watch and directly add them to the World Clock list. For the selected regions, you can tap in the World Clock to view the current time, day of the week, and the time difference from your watch's current time zone.

After pairing the watch with the app, go to the Devices page in the app and click on Health Monitoring.

1. Enable 24/7 Heart Rate Monitoring and configure:
- (1) High Resting Heart Rate Alert: Set the alert value or turn it off
- (2) Low Resting Heart Rate Alert: Set the alert value or turn it off
- (3) High Activity Heart Rate Alert: Set the alert value or turn it off

2. Enable 24/7 Blood Oxygen Monitoring and configure:
- (1) Low Blood Oxygen Alert: Set the alert value or turn it off

3. Enable 24/7 Stress Monitoring:
- Wear the watch, and it will automatically measure and record stress levels every 30 minutes.

After pairing the watch with the app, go to the Devices page in the app and click on the Frequent Contacts feature (up to 30 contacts can be added).

1. For Android:
- In the Frequent Contacts feature interface, tap Add.
- The phone's contact list will pop up. Select the contacts to add to the app, and the app will automatically sync to the watch.

2. For iOS:
- In the Frequent Contacts feature interface, tap Add.
- An input box will pop up. Manually enter the contact information and save it. The app will automatically sync to the watch.

1. Press the button to open the function list, and select Flashlight. Click to turn on the flashlight.
2. In the main watch dial interface, swipe down to display the shortcut menu. Select Flashlight. Click to turn on the flashlight.

1. Press the button to enter the function list, select Settings, enter the System menu, select the Factory Reset settings option, tap Factory Reset, and the watch will clear data and restart.

2. Swipe down on the main watch face to display the shortcut menu, select Settings, enter the System menu, select the Factory Reset settings option, tap Factory Reset, and the watch will clear all data and restart.

To customize the workout app list on your Watch Pro, connect it to the app. In the Regular Exercises feature in the app, select Edit and then Add/Remove Exercises. Once you have finished making your changes, save them and the app will automatically sync them to your Watch Pro 2.

Ensure that the Watch Pro 2's case back is clean, dry, and free of debris before putting it on your wrist. Fit the monitoring unit snugly against your wrist.Do not stick protective film on the Watch Pro 2's case back, as this can interfere with the sensors and lead to inaccurate recording of or missing heart rate, blood oxygen, or sleep data. To ensure the accuracy of measurements, please wear the Watch Pro at least one or two fingers' distance from your wrist joint. Wear the strap loose enough for comfort, but tighten it for more accurate measurements during exercise. Tips: The Watch Pro 2 is made with materials that are safe for your skin and health, so you can wear it without worry.However, if you experience any skin irritation while wearing it, stop wearing it and consult a doctor.

Once you have paired your Watch Pro 2 with the app, you can access the Watch Face marketplace in the app.（App: My Devices > Dial gallery > More) From there, you can switch between watch faces, download a new one and delete unwanted ones.

To track your sleep, you need to wear the Watch Pro 2 correctly. The Watch Pro 2 can automatically record the duration of your sleep and identify the stages of sleep, including deep sleep, light sleep, and wakefulness.

Pair the Watch Pro with the app. On your phone, open a music player. On the Watch Pro, press the button to open the function list, and select Music to enter the Music Control interface. There, you can adjust the volume, skip to the previous or next track, and play or pause the music.