Product Feature

The Nothing X Pro transcription model uses cloud-based AI to convert recorded speech into text. Once a recording is uploaded and processed, the model can generate a text transcript that is easier to read, search, and review.

Because transcription is performed using cloud-based AI models, an internet connection is required. The Pro model also benefits from continuous improvements, helping deliver enhanced transcription capabilities and support for more languages over time.

Call Recording allows you to manually record a phone call using their earbuds.

While on an Active-Call, you can START and STOP recording using a gesture on the earbuds.

An 'Active-Call' can be identified anytime the earbuds enter the Bluetooth Hands-Free Profile/HSP or similar profiles during a call. An Active-Call can be on the cellular network or any 3rd party app. For example: Whatsapp Video/Voice Call, Zoom Calls, Google Meets etc.

*
1.The Call Recording feature is intended for legitimate personal uses such as note-taking, learning, and information review.
2.Please comply with applicable local laws and regulations regarding call recording, privacy, and data usage, and ensure that all participants are informed before recording.
3.To promote transparency, an audio notification may be played to the other party when call recording is activated.
4.Due to regional laws and regulations, Call Recording is only available in selected regions. Please refer to: [Link] for the full availability list. Do not record, distribute, or share private, confidential, or copyrighted content without proper authorization. Users are solely responsible for any liabilities arising from improper use of this feature.

Audio Snapshot is like a Screenshot, but for Sound.

While listening to audio on your phones (podcast, music, video, etc.), you can trigger an Audio Snapshot to capture a short clip of what you were listening to around that moment.

The snapshot may include audio from before, after, or only after the trigger moment, depending on the capture mechanism. You can change the mechanism in Nothing X App.

*The Snapshot feature is designed to help users quickly capture important audio moments for personal purposes such as learning, idea preservation, self-improvement, and daily review. When using this feature, please comply with applicable laws and regulations, and respect the privacy and intellectual property rights of others. Do not record, distribute, or share copyrighted content without proper authorization, or use recordings for any unlawful, infringing, or commercial purposes. Users are solely responsible for any liabilities arising from improper use of this feature.

Your hearing condition will be tested through scientific testing methods, and an audio dynamic compensation scheme suitable for you will be intelligently generated based on your test results, allowing you to hear the clearest sound details.

Support

Supported
With Nothing Phone less than 120ms under Game Mode

Earbuds Charging:
Place the Earbuds in the charging case and close the lid to start charging.

Charging for the Charging Case (Including Earbuds):
Place the Earbuds in the charging case and close the lid;
Connect the charging case to a power source using the included charging cable.

Charging Status Indications:
Charging case indicators light up from bottom to top: Charging in progress.
All indicators stay on steadily: Fully charged.

Not Support

LDAC, AAC, SBC

Support

Support

Android 8.0 and above
iOS 13 and above

ENC stands for Environmental Noise Cancellation. It is specially tuned to remove unwanted background noise while using the microphone for calls. For your microphone, ENC ensures others won't hear your background noise when speaking.

The product offers four sound effects: BALANCED、MORE BASS、MORE TREBLE、VOICE.
It also supports the Custom mode, allowing users to set the corresponding effects according to their own preferences.

*Please download the Nothing X App to make the settings. Through the Nothing X App, you can also access more personalized settings to enhance your user experience.

Bluetooth 6.0

When the earbuds are in an unconnected and unworn state, they will enter an auto power-off mode after 60 minutes (this duration may vary between products). To reactivate them, you need to manually place the earbuds back into the charging case.

If the earbuds remain idle after being fully charged, they will enter a fully charged power-off state after 2 minutes.

Support

Plastic housing, silicone ear tips and stainless steel hinges. The plastic exterior is durable, UV-resistant and impact-resistant. Both earbuds and charging case are plastic on the outside.

The earbuds and the charging case have an IP54 protection rating (level 5 dustproof and level 4 waterproof), based on the IEC 60529 testing standard, tested under controlled laboratory conditions.

The earbuds are not designed for swimming or other water sports and should not be worn in the shower. If you use the earbuds while training, sweating heavily or splashing water, please wipe them clean with a soft, dry, lint-free cloth before placing them back in the charging case. Do not use heat or compressed air to dry the earbuds.

Please note that damage caused by immersion in liquid is not covered under the warranty.

The charging case cannot be charged when its battery level is below 5%. When the charging case runs out of power, the LED indicator will not be displayed and the buttons on the charging case will not work. If this happens, please charge the charging case in time.

The Earbuds can store a maximum of 8 device records.

After the Earbuds are paired and connected, they can be used normally by wearing only the left Earbuds or the right Earbuds.
If one Earbud is lost, it is impossible to re-pair with the mobile phone when only the remaining Earbud is in the charging case.

Charging status: Lights turn on sequentially from bottom to top.
Fully charged status: All indicator lights stay steadily lit.
Pairing status: The top and bottom pixels flash white together, alternating with the middle pixel white in a repeating pattern.

Check Battery Status
- Bottom pixel red: Battery<20%
- Bottom pixel white: 20%≦Battery≦33%
- Bottom and middle pixels white:33%<Battery≦66%
- Three pixels white: 66%<Battery≦100%

Factory reset: Press and hold the pairing button for 10 seconds. All three pixels flash white rapidly in sequence. Then the bottom pixel turns red. After the red off, returns to the pairing light pattern.

Note: If your earbuds support recording, a factory reset will delete all unsynced recordings saved on the earbuds. Uninstalling or reinstalling the Nothing X App will also erase all recordings in the app. Please back up important recordings first before performing a factory reset, uninstalling or reinstalling the app to avoid data loss.

Static Spatial Audio creates a three-dimensional sound effect, making the audio appear to come from a fixed position in front of the device. When you turn your head, the perceived direction of the sound remains unchanged. Compared to traditional stereo sound, it provides a more immersive and realistic listening experience with a stronger sense of presence.
Please download the Nothing X app for configuration.

Adaptive Mode monitors the noisiness of your environment and adjusts the noise cancellation accordingly.

This Earbuds supports Active Noise Cancellation (ANC) up to 45dB.

Supported

Earbuds: 55mAh
Charging case: 500mAh

Not supported

Playback with ANC OFF: 5 mins charge for 1 hour (Earbuds)
Playback with ANC OFF: 10 mins charge for 10 hours (Earbuds+Charging Case)

Testing conditions: The results were measured when playing music at 50% volume in AAC mode. The charging and battery tests are based on the results from Nothing's internal laboratory (at 25°C or 77°F). The actual battery life is affected by factors such as the volume during use, frequency of use, output source, environmental interference, product features used, and usage habits. The actual experience will depend on individual usage situations.