How-to

If the Earbuds are currently outputting sound from a certain mobile device, pressing the control buttons will control that device; if the Earbuds are in a non-playing state, the control buttons will control the last connected device or the last device that played sound through the Earbuds.

The default gesture controls of this product cannot activate the voice assistant. You can enter the Nothing X App, select the left ear or right ear in the control settings, and set the tap/long press or double tap and hold gesture to activate the voice assistant. Once the settings are completed, you can activate the voice assistant through the corresponding gesture.

For more information about operational functions, you can download the Nothing X App, which is available for search and download in the Google Play Store and the Apple App Store.

Please make sure you accurately touch the sensing area. The touch-sensitive zones are located on both lower sides of the ear stem or the circular mark on the upper part of the ear stem. You may refer to the user manual included in the package for exact positions.

Note: The touch sensor is highly sensitive. Avoid touching the sensor area accidentally in advance to prevent false triggers and misoperation recognition.

1. After the Earbuds have established connections with two mobile phones and neither of the phones is in a call state:
1) When either mobile phone receives an incoming call, the Earbuds will play the sound of the phone that is receiving the call.

2. After the Earbuds have established connections with two mobile phones and exactly one of the phones is already in a call state:
1) When the non-calling mobile phone receives an incoming call: the incoming call ringtone of the local mobile phone can be heard through the Earbuds, and the Earbuds buttons will prioritize controlling the phone that is receiving the incoming call; if the current call is ended, the Earbuds will switch the audio channel to the phone that is receiving the incoming call.

1. After the Earbuds has established connections with two devices and both mobile devices are in an idle state:
1) The Earbuds will output the sound of the mobile device that receives an incoming call or makes an outgoing call.
2) The Earbuds will output the sound of the mobile device that starts playing music first.

2. After the Earbuds has established connections with two devices and exactly one of the mobile devices is in a music-playing state:
1) When the non-music-playing device receives an incoming call or makes an outgoing call
The Earbuds will mute the currently playing music (without pausing it) and then switch to the sound of the device with the incoming or outgoing call. After the call is ended, it will switch back to the connection of the music-playing device and resume playing music.
2) When the non-music-playing device starts playing music
No sound channel switching will occur. Both devices will be in a playing state, and the device that starts playing music later will be in a muted state.

1. Reconnection after lid opening:
1) When the Earbuds are turned on with the dual-connection feature enabled, if the number of connected devices is less than two, the Earbuds will attempt to reconnect to the last two devices they were connected to. If the dual-connection feature is enabled for the first time and there are no previous reconnection records, the Earbuds will remain connected to a single device (when in single-connection mode, the Earbuds will not automatically enter pairing mode; pairing with a new device must be initiated manually by the user via a long press of the button). If the Earbuds fail to reconnect to other devices, they will stay in single-connection mode and will not enter pairing mode.
2) If the Earbuds and a terminal device are disconnected due to being out of connection range, when they come back within the connection range again, the Earbuds will only reconnect to the mobile phone that was disconnected due to the range issue.
3) The Earbuds will not trigger reconnection when they are in a call or playing music.
4) If the Earbuds are in the reconnection state and enter a call or music playback scenario, they will pause the reconnection within 5 seconds. If the call or music playback ends within the reconnection timeout period, the Earbuds will resume the paused reconnection until the timeout expires. After the reconnection timeout, the connection to the Earbuds can only be initiated from the device side.

2. Preemptive connection:
The Earbuds in dual-connection mode can be preemptively connected to another device, following the principles below:
1) When neither of the two connected mobile phones is in music playback state, the Earbuds will disconnect from the one that was connected first and connect to the device initiating the preemptive connection.
2) When the Earbuds enter the pairing mode for a new device while already connected to two devices, they will disconnect from one of the two connected devices upon entering the pairing mode, allowing themselves to be detected and connected to the new device after the disconnection.
3) When the Earbuds are already connected to two devices and a third device with a previous connection record initiates a preemptive connection, the Earbuds will disconnect from one of the two currently connected devices, enabling the third device to establish the preemptive connection after the disconnection.

Tips:
Music playback state:
1) If one of the

Take the earbuds out of the charging case, wear them with both ears, and press and hold both ears at the same time for 10 seconds until the prompt for restoring factory settings appears

After the Earbuds are connected to a mobile phone, you can either adjust the volume directly on the mobile phone device or enable the double-pinch/tap and hold function of the Earbuds on the control settings page of the Nothing X App.

A double-pinch/tap and hold 1-second will adjust the volume (when this operation is triggered and the hold state is maintained, the volume will increase or decrease by one level every 0.9 seconds, and the volume adjustment will stop when the button is released).

Press and hold the touch area of the Earbuds for 1 second to switch between the active noise cancellation mode and the transparency mode.
* You can set and switch between various noise cancellation modes in the Nothing X App, and you can also set the smart knob of the charging case to control the noise cancellation mode.

This Earbuds supports pinch/press control, the default gesture functions are as follows:

Single pinch/press
- Play / pause
- Answer / end call

Double pinch/press
- Next track
- Reject call

Triple pinch/press
- Previous track

Hold
- Noise cancellation / Transparency

Double pinch/press and hold
- Volume up / volume down

*Please set up the functionality in the Nothing X App.

1. If you are using an Android device, you can download the Nothing X App by searching for it on Google Play. If you are using an iOS device, you can download the Nothing X App by searching for it on the App Store.

2. You can also download the Nothing X App by visiting the following website and scanning the QR code: LINK

3. The QR code will also be found on the user manual inside the package or on the package's color box, and you can download the app by scanning it.

Charging the Earbuds:
Insert the earbuds into the charging case and close the lid. Charging will start automatically.

Charging the Case (with earbuds):
After placing the earbuds in the case and closing the lid, connect the case to a power source using the included cable.

LED Indications:
Flashing white: Charging
Solid white: Fully charged