Product Feature

When the headphones battery is low, it is recommended to use a standard charger with a Type-C charging cable. The headphones support charging at up to 5W.

Tips: If the headphones will not be used for an extended period, it is recommended to keep the battery level above 50%.

LDAC, AAC, SBC
LC3 (Broadcast Audio only)

Yes, Microsoft Swift Pair is supported.

Yes, Google Fast Pair is supported.

Supported, Please make sure Over-ear detection is enabled.

Supported. Both USB-C audio and 3.5mm Aux-In wired audio connection are supported.

Headphone (1) Pro supports dual connection.
This feature is turned off by default and needs to be enabled through the Nothing X app.

More options available in the Nothing X App.

Android 8.0 and above
iOS 13.0 and above

Aux connection supports Hi-Res audio at up to 96kHz/24-bit.
USB-C connection supports lossless audio at up to 192kHz/24-bit.
The actual sampling rate and bit depth may vary depending on the connected audio source and the source audio specifications. The above are the maximum supported specifications.

Supported.
When connected via Bluetooth, the latency is below 120 ms on Nothing phones under Game Mode.
When connected with a 3.5 mm audio cable and Flat EQ enabled, the latency is below 20 ms.

ENC stands for Environmental Noise Cancellation. It's specially tuned to remove unwanted background noise when you use the microphone for calls. ENC ensures others won't hear your background noise when you're speaking.

Supported, The Headphone (1) Pro offers five Spatial Audio modes: Balanced, Studio B, Live House, Concert Hall and Club. It also supports head-tracking.
*Please go to the Nothing X app to set it up.

Headphone (1) Pro supported over-ear detection.

Headphone (1) Pro is designed to deliver a premium listening experience tailored to different audio preferences. It offers five default sound profiles: Balanced, More bass, More treble, More vocals, More detail.

It also supports Custom and Advanced modes, allowing users to fine-tune the sound based on their personal preferences.

More options available in the Nothing X App.

Bluetooth 6.1

Featuring a switch design, this product will not power off when idle and not being worn, but will enter Power Sleep mode.
The earphones will automatically switch to Sleep mode after being idle and unworn for 30 minutes.
Pressing any button, inserting a 3.5 mm connector, or performing any other operation will wake the earphones from sleep mode.

Headphone (1) Pro supports custom EQ settings.

The glass on the outer casing is tempered glass with an anti-explosion film. The surface hardness reaches 9H. Reliability testing confirms it can withstand a 1.8-metre drop impact.

The support arms are made of titanium alloy. The outer casing is made of aluminum alloy with a tempered glass rear cover.

The ear cushions on the Headphone (1) Pro are made of PU leather (polyurethane synthetic leather), filled with high-resilience memory foam to provide a soft and comfortable fit for extended wear.

The headphones have an IP52 protection rating, based on the IEC 60529 testing standard, tested under controlled laboratory conditions.
The headphones are not designed for swimming or other water sports and should not be worn in the shower. If you use the headphones while training, sweating heavily or splashing water, please wipe them clean with a soft, dry, lint-free cloth before placing them back in the Carrying case. Do not use heat or compressed air to dry the headphones.
Please note that damage caused by immersion in liquid is not covered under the warranty.

Charging Status:
1. White breathing light: Charging
2. Solid white light: Fully charged
3. Flashing white light: Pairing mode

Battery Status:
1. No light: Battery fully depleted
2. Red light: Battery level below 30%
3. White light: Battery level at or above 30%

Factory Reset:
1. Press and hold the Bluetooth pairing button for 10 seconds
2. Red light flashes 3 times, then stays solid white — reset successful.

Yes, Headphone (1) Pro supports Active Noise Cancellation (ANC) up to 46 dB.

Yes, Headphone (1) Pro supports fast charging.
With a 5-minute charge:
With ANC mode off, the headphones can be used for 4 hours continuously.
With ANC mode on, the headphones can be used for 2 hours continuously.

Test Conditions : Measured under AAC mode at 50% volume. Charging and battery tests are based on internal results from Nothing’s labs (25°C or 77°F). Actual battery life may vary depending on volume, frequency, output source, environmental interference, product features used, and usage habits. Actual experience will depend on individual use.

Playback time:
AAC:
Playback with ANC off: 68 hours
Playback with ANC on: 30 hours
LDAC:
Playback with ANC off: 53 hours
Playback with ANC on: 28 hours

Talk time:
Talk time with ANC off: 40 hours
Talk time with ANC on: 33 hours

Test Conditions : Battery life tests are based on internal results from Nothing’s labs. Measured at 25°C (77°F) at 50% volume while playing music or making calls, and the rest of the features at default settings. Actual battery life may vary depending on volume, frequency, output source, environmental interference, product features used, and usage habits. Actual experience will depend on individual use.